As is true with most things, I suspect. We went to an introductory session to learn curling the other evening, under the auspices of the South Shore Curling Club. Links to photos are in this post.
My review: 5 stars for fun and 2.5 stars for my ability to curl. Let me emphasize that my ancien body—not that well taken care of, unfortunately—is responsible for this rating, not the club, not the venue, and certainly not MaryBeth and Mike, who did their level best to make curlers out of each of the four noobs they drew. (Luck of the draw, I suppose!)
My right leg couldn’t support me in the classic curling launch of the stone, but this is apparently not as unusual a condition as I feared. Some brooms are made with a bracket on the end allowing the curler to stand and walk, or hurry more likely, to the release point. That meant I could at least sling the stone down the ice.
Nothing made sweeping any easier, however. The club has done this before; they provided us with large wide rubber bands to slip over the balls of our feet, allowing some measure of mobility on the ice. Not as good as the slippers club members wore over their actual curling shoes, but believe me, far better than trying to walk on the ice in the sneakers we had been advised to wear. But the stones have to move pretty quickly to travel the 90 feet (in our rink) or 100 feet (Olympic distance), and I found it hard to keep up and sweep at the same time. Of course, you quickly realize that sweeping can’t slow the stone down, only speed it up slightly, or change its direction, so… Maybe not being able to catch a speeding stone isn’t so bad!
Curling is a genteel sport; sincere handshakes and well-wishes open and close each match. As I said above, five from five for fun, even though I’ll never make a good curler. I’m glad we went, and recommend an introductory session like this to any of you that have watched curling on you TV and thought… I can do that. Perhaps you actually can!
Comments are welcome; thanks for visiting!
Wednesday, April 6, 2016
Thursday, March 10, 2016
Moving On; Word Joiner Update
The Goodreads Giveaway ended on the 29th, and I sent the books to the people that Goodreads selected. I hope they read them, and that they post a review, although my experience hasn’t been all that stellar.
I sent the current version of Discoveries to my reader. Maybe it’s been long enough it won’t seem like it’s all familiar. After her changes, I’ll publish the ebook and fork the paper version. But now, it’s time to go on to Princess, and finish it up.
Word Joiners
A comment on the topic of the word joiner being used to keep em dashes from being split from the word they follow: I haven’t found a good way to search for an em dash without a word joiner. Searching for the absence of something has never been a strong point in the software I’m familiar with. Open Office shows the word joiner character as a shaded vertical line between the letter and the em dash, but while those make it obvious where I have included it, it doesn’t do much for searching. In Scrivener, the word joiner can be detected by moving the cursor (with the arrow keys) through the em dash; the cursor will not move for that one character when the word joiner is detected (since it's invisible, after all).
In addition, I’m not an expert on regular expressions (used by both Scrivener and Open Office) by any means, and I’m sure a search string can be constructed to find em dashes not preceded by a word joiner, but I took the (in this case) shorter path, and searched for every letter followed by an em dash, in sequence.
As always, comments welcome!
I sent the current version of Discoveries to my reader. Maybe it’s been long enough it won’t seem like it’s all familiar. After her changes, I’ll publish the ebook and fork the paper version. But now, it’s time to go on to Princess, and finish it up.
Word Joiners
A comment on the topic of the word joiner being used to keep em dashes from being split from the word they follow: I haven’t found a good way to search for an em dash without a word joiner. Searching for the absence of something has never been a strong point in the software I’m familiar with. Open Office shows the word joiner character as a shaded vertical line between the letter and the em dash, but while those make it obvious where I have included it, it doesn’t do much for searching. In Scrivener, the word joiner can be detected by moving the cursor (with the arrow keys) through the em dash; the cursor will not move for that one character when the word joiner is detected (since it's invisible, after all).
In addition, I’m not an expert on regular expressions (used by both Scrivener and Open Office) by any means, and I’m sure a search string can be constructed to find em dashes not preceded by a word joiner, but I took the (in this case) shorter path, and searched for every letter followed by an em dash, in sequence.
As always, comments welcome!
Tuesday, March 1, 2016
Super Tuesday Update
I voted. If you have the opportunity to vote today, please take advantage of it. We don’t want the election dominated (or worse, won) by non-voters.
The giveaway for Coda? over at Goodreads is finished. I have the names and addresses of those selected, and will have their books in the mail in the next week.
A final read-through of Discoveries, and that version will be off to my reader for her comments. I’m hopeful that I’ve cured some of the issues we found during earlier reviews. Also hopeful that it’ll be out before the end of the month.
The next book is about forty percent—37000 words to date. Progress is slower than I wanted, but once Discoveries is done, it should speed up.
That’s it for today. Go and vote!
The giveaway for Coda? over at Goodreads is finished. I have the names and addresses of those selected, and will have their books in the mail in the next week.
A final read-through of Discoveries, and that version will be off to my reader for her comments. I’m hopeful that I’ve cured some of the issues we found during earlier reviews. Also hopeful that it’ll be out before the end of the month.
The next book is about forty percent—37000 words to date. Progress is slower than I wanted, but once Discoveries is done, it should speed up.
That’s it for today. Go and vote!
Monday, February 1, 2016
A Scrivener Tip - Widows and Orphans and TOC
Working on the print version of Discoveries, the next book in the Mercenaries series, and I decided to post on an issue that I've been going back and forth with Scrivener's excellent help staff on.
To wit:
What do I do when this happens?
For ebooks, you wouldn't do anything to correct the widow, since the reading device will reflow the text depending on the font selected, and the size and a whole lot of other things not under our control as book designers.
For print however, having two words alone at the top of the page is a no-no; the Chicago Manual of Style denotes this as the classic widow of widows and orphans fame. Having it run into the next chapter's title header block only compounds the error.
Based on what Scrivener support had told me (or maybe, how I interpreted what they said), this error is due to the pdf engine they use, and the only fix is to modify the original text so it doesn't occur. My experience says if the orphan runs into the upcoming heading, it does so when the last line of the section before falls on the first line of the next page.
In this case, I choose to shorten a line by deleting a word that was not superfluous, but losing it won't change the meaning at least.
That yields the following--much better from my point of view:
This look through of the ms should be done as the last step before you upload the pdf file to CreateSpace or whoever your POD printer is. That's because you are going to make minor changes to the text to reduce or eliminate these widows and orphans, so you need to review each page to make sure they meet your standards.
If you complete this step, and then make more changes, you'll need to go back and revisit this check, perhaps undoing some of the changes you made.
Another thing to watch for: When Compiled with the Formatting option Begin this Section on a Recto Page (which begins the specified section on a right hand or odd numbered page), sometimes (although not in this case), the last words falling on the first page of the next section confuses the Table of Contents generator and the relationship between the page numbers and the call-out in the TOC. In some cases, the TOC points to a odd numbered page, but the section actually starts a page later. Sometimes. It's not consistent in my experience, but that's a different post. As above, some judicious trimming seems to do the job by keeping the last line from slipping by the bitter end of a page.
i apologize if this is unclear. Either email me (sidebar) or add a comment if you think you may want to consider this, but find it too obscure in either description or suggestion.
Obviously, you may comment for any other reason also! Well, except the Iowa Caucuses.
Wednesday, January 20, 2016
Saturday, January 16, 2016
Useful Scrivener Tips
Perhaps some of you are as backwards as I; if so the following about how to use Scrivener may help answer one or two questions which, depending on your level of OCD, may or may not have caused you distress. So, the 'useful' in the title refers to me, and hopefully, to you.
“How’s Ian? And Kev? And Amy got back okay? And ev
—”
This may show up when dialog is interrupted. (If you have a problem with the open/close quote mark following the em dash, read on.) In case you wondered, I’ve forced the line break where it normally wouldn’t occur, to create the example.
In like manner, the structure without quote marks is typically used for internal monologue that’s cut off, similar to dialog being interrupted, so:
Probably wasn’t even thinking of that possibility, that she would
—
The character ending both these examples is the em dash. In Scrivener, the em dash is created by either of two techniques: clicking the ‘hyphen’ key twice (the easy way), or entering (on a Mac, at least), shift option hyphen
To prevent a line break from occurring between the em dash and the word preceding it, someone created the Word Joiner. Using the Word Joiner will force the lines above to appear as you’d hope and expect:
“How’s Ian? And Kev? And Amy got back okay? And
ev—”
and
Probably wasn’t even thinking of that possibility, that she
would—
no matter how the page size and margins work out. Note, there is no space between the final letter and the —; the font appears to have a narrow space.
The Word Joiner is entered by placing the cursor between the final character (either the "v" or the "d") and the “em dash.” On the Edit Menu, slide down to Insert, and select Word Joiner. Note that, because it is zero-width, you will observe no change in the text, however, the character count in the status bar will increase. Also, if the change is made where the word and em dash have been split, the word will flow to the next line, coupled with the em dash.
As you may have observed, this addition forces the em dash and the word preceding it to both fall on the next line, so it may affect the way the page lays out. This is more of a concern with the pdf file, since the text on a paperback page doesn’t flow the way an ebook does.
To be clear, I use Find and Replace when I'm finished to add the Word Joiner before all the em dashes, since I can't predict in an e-book where the line breaks will appear.
There are three plausible ways to deal with these. First is the one suggested: uniformly enter the quote, then backspace and enter the em dash. Second, finish the word, enter the em dash, and then type the following keys to create a close quote: shift option [
Third, and excellent for one of your final steps in proofing your ms, use Find and Replace to search for instances of —“ and replace them with the correct version.
£30 000 instead of £30
000, which might occur due to line length, page size and font choice. Again, I forced the line break as an example.
There are other situations where you might desire to not have a pair of words split; the Non-breaking Space will allow you that control.
The Word Joiner
Have you had a sentence in either your e-book or paperback (the pdf for which you created with Scrivener) that, by the nature of the margins and font size and all those other variables, ends split across two lines, so:“How’s Ian? And Kev? And Amy got back okay? And ev
—”
This may show up when dialog is interrupted. (If you have a problem with the open/close quote mark following the em dash, read on.) In case you wondered, I’ve forced the line break where it normally wouldn’t occur, to create the example.
In like manner, the structure without quote marks is typically used for internal monologue that’s cut off, similar to dialog being interrupted, so:
Probably wasn’t even thinking of that possibility, that she would
—
The character ending both these examples is the em dash. In Scrivener, the em dash is created by either of two techniques: clicking the ‘hyphen’ key twice (the easy way), or entering (on a Mac, at least), shift option hyphen
To prevent a line break from occurring between the em dash and the word preceding it, someone created the Word Joiner. Using the Word Joiner will force the lines above to appear as you’d hope and expect:
“How’s Ian? And Kev? And Amy got back okay? And
ev—”
and
Probably wasn’t even thinking of that possibility, that she
would—
no matter how the page size and margins work out. Note, there is no space between the final letter and the —; the font appears to have a narrow space.
The Word Joiner is entered by placing the cursor between the final character (either the "v" or the "d") and the “em dash.” On the Edit Menu, slide down to Insert, and select Word Joiner. Note that, because it is zero-width, you will observe no change in the text, however, the character count in the status bar will increase. Also, if the change is made where the word and em dash have been split, the word will flow to the next line, coupled with the em dash.
As you may have observed, this addition forces the em dash and the word preceding it to both fall on the next line, so it may affect the way the page lays out. This is more of a concern with the pdf file, since the text on a paperback page doesn’t flow the way an ebook does.
To be clear, I use Find and Replace when I'm finished to add the Word Joiner before all the em dashes, since I can't predict in an e-book where the line breaks will appear.
The open quote where a close quote should be
According to Scrivener support (who are uncommonly helpful and unfailingly polite), the —“ seen when a close quote is entered following an em dash, is a bug in the MacOS text handler. They recommend entering the quote mark following the text, then back-spacing and entering the two hyphens to create the em dash. This works. However, if you’re at all like me, you miss one or two (or even more) of these.There are three plausible ways to deal with these. First is the one suggested: uniformly enter the quote, then backspace and enter the em dash. Second, finish the word, enter the em dash, and then type the following keys to create a close quote: shift option [
Third, and excellent for one of your final steps in proofing your ms, use Find and Replace to search for instances of —“ and replace them with the correct version.
The Non-breaking Space
A last tip: you may have noticed on the Edit>Insert menu, the Non-breaking Space. This character creates a space which prevents a line break preceding or following it, so that numbers, for example, appear like this:£30 000 instead of £30
000, which might occur due to line length, page size and font choice. Again, I forced the line break as an example.
There are other situations where you might desire to not have a pair of words split; the Non-breaking Space will allow you that control.
In closing
Google em dash to find suggested usages. In fiction, I find it most useful to signal an interruption in speech or thought, followed by using it to signal a parenthetical expression.
A word of warning, the characters generated with the option key only work (in my case, at least) with the US keyboard enabled. Specifically, when I select the Unicode keyboard, they do not work. Also, while Unicode includes the non-breaking hyphen (U+2011) (Prevent line breaks before or after), and an em dash (U+2014) (Line break opportunity before AND after), it has no Non-breaking em dash, as we would like. Feel free to experiment with these at your leisure. You may find characters like ([which may also show as a question mark within a square] created, in this case, by typing option feff [No break zero-width space] using the Unicode keyboard - this appears to be an alternate coding for the Word Joiner [U+2060]). This isn’t intended to be a treatise on Unicode; just an explanation of the character you might see when entering a code that the character set doesn’t include.
As always, YMMV. I'm using Scrivener 2.7 on a MacBook Pro, MacOS 10.11.2. I'm certain the encodings for these characters (and thousands of others) are available under Windows and for Word users; since I'm not one of those, I recommend a brief Google search, which should fill your screen with more information than you could ever hope for.
Comments, as always are welcome. If you have a similar tip, I'd be happy to see it in the comments.
250221 Corrected per Jake's comment.
Thursday, January 14, 2016
Subscribe to:
Posts (Atom)